ELM327 za Ford/Mazda vozila sa prekidacem za HS-MS CAN
Dijagnostiku sam kupio za moj bivsi auto ali mi nije trebala
moguca zamena za OPCOM
Description:
Chip: PIC18F25K80 &CH340
Hardware Version: V1.5
USB Interfave : FOR PC
Compatible software: FORScan, Elmconfig, FF2 and FoCCCus, plus more
Applicable: All vehicles complying with OBD II
Operating Temperature: -40℃-85℃
Working Humidity: Less than 60%
Size: 3.4*1.8*1inche
Designed: For FORScan software
Included: Drivers and instructions
Funtion: Modificate to different CAN buses
Support: MS CAN bus and HS CAN bus
Functions:
1. Read diagnostic trouble generic codes
2. Clear trouble codes and turn off the MIL ("Check Engine" light)
3. Display current sensor data, including:
4. Engine RPM
5. Calculated Load Value
6. Coolant Temperature
7. Fuel System Status
8. Vehicle Speed
9. Short Term Fuel Trim
10. Long Term Fuel Trim
11. Intake Manifold Pressure
12. Timing Advance
13. Intake Air Temperature
14. Air Flow Rate
15. Absolute Throttle Position
16. Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
18. Fuel Pressure
19. Many others. . .
Supports all OBD-II Protocols :
0. Automatic
1. SAE J1850 PWM(41.6Kbaud)
2. SAE J1850 VPW(10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP(fast init,10.4 Kbaud)
6. ISO15765-4 CAN(11bit ID,500 Kbaud)
7. ISO15765-4 CAN(29bit ID,500 Kbaud)
8. ISO15765-4 CAN(11bit ID,250 Kbaud)
9. ISO15765-4 CAN(29bit ID,250 Kbaud)
A. SAE J1939 CAN(29bit ID,250*Kbaud)
B. USER1 CAN(11*bit ID,125*Kbaud)
C. USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)
Pin Configurations:
Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11